What is EMC?
Updated: Sep 4, 2020
EMC stands for electromagnetic compatibility. Every electronic device/machine on the market must be EMC compliant, meaning it must fulfill the EMC regulations and standards defined by the country where the product is sold.
An EMC complaint product must...
... NOT interfere with other devices/machines in its environment (emission).
... NOT being upset by other devices/machines in its environment (immunity).
... NOT interfere with itself (signal integrity).
... NOT be destroyed or malfunction when touched by a human (electrostatic discharge, ESD).
In the picture below, you see a vending machine as an EMC victim. The machine (victim) must show a certain immunity against electromagnetic emissions e.g. from mobile phones (over the air) or from high power machines (over the power lines). In addition, the user which touches the display may produce an electrostatic discharge (ESD) which must not destroy the machine.

There are other common abbreviations around EMC:
EMI (Electromagnetic Interference)
ESD (Electrostatic Discharge)
EMI and ESD are often mixed up with EMC. Therefore, I would like to explain these abbreviations to you in more detail.
EMI vs. EMC
EMI stands for electromagnetic interference. EMI means that one electronic device/machine A is causing disturbance to another electronic device/machine B, which is in the surrounding of device/machine A.
What is the difference between EMC and EMI? Now, an EMC compliant product has to be tested on EMI during its development. For an EMC compliant product, EMI should not happen any more. This is due to the fact, that EMC compliant products proved their electromagnetic immunity to be high enough and their electromagnetic emission to be low enough to work seamlessly in its predefined environment.
EMI can happen over the air (radio frequency interference, RFI) or over power and signal lines of a product.
Here some examples of EMI:
EMI over power lines: Your TV shows starts to flicker every time you use your coffee grinder or mixer in the kitchen. This would mean that your TV got upset over its power line connection, because the grinder or mixer emits some disturbances back into the power lines.
EMI over the air: You are listening to some music over your audio equipment. From time to time, you can here a noise coming out of the speakers. This may be caused by your mobile phone e.g. when a short message (SMS) arrives. The radio frequency signals of the mobile phone could disturb your audio equipment.
ESD vs. EMC
ESD stands for electrostatic discharge. Every EMC compliant product has to be tested on ESD during its development. This means that EMC compliant products should withstand certain electrostatic discharges of e.g. 1kV, 15kV or more. This may sound like very high levels (e.g. compared to your power line voltage of 110V or 230V). However, it is easily possible that your body is charged to 10kV or more.
A real life example of ESD for instance is, if you get an electric shock when you are touching your cars door handle after getting off your car.
But why is that?
Friction: While driving, your cars wheels rub on the ground and friction of non-conductive materials (e.g. your cars wheels) bring electrons from one material to the other.
Charge: When electrons change from one material to the other, and there is an isolation in between there materials (in this case air), a charge is created (one material has less electrons (electron-deficient), whereas the other material has more electrons on its side (electron surplus)).
Discharge: Now, when you get out of your car, your body “connects” with the ground and therefore has the same electric potential like ground (0V). However, your cars metal case has still the potential of several kV. If you now touch the handle of your car, an electrostatic discharge (ESD) happens, and this may hurt (electric shock).
I don’t know how much you know about electronics? Just in case you know a lot, here a schematic of an ESD generator (ESD test equipment) which may help you to understand the topic in more detail.
Charge: Close the Load Switch and bring Cs to the high voltage of e.g. +8kV.
Isolate: Open the Load Switch. The ESD generator is now ready to be discharged.
Discharge: Close the Discharge Switch and the ESD generator now discharges and an ESD pulse comes out of the ESD generator.

Closure
I hope this blog post helped to clarify some confusion about EMC, EMI and ESD!? If not: please let me know what you would like to have explained differently or in addition.
Please SHARE and COMMENT! Thank you.
-The Academy of EMC
References
[1] International Electrotechnical Commission, IEC 61000-4-2:2008 - Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test, 2008.




ad88.cheap Mình vừa mới biết đến trang này nên có vào xem qua một chút để hiểu cách họ xây dựng nội dung. Không phải kiểu ngồi tìm hiểu từng chức năng, mình chỉ lướt trang chủ và xem các mục được bố trí ra sao. Có thể thấy họ chia thông tin thành những phần khá riêng biệt, nhìn vào không bị cảm giác lộn xộn hay quá nhiều chữ. Mình thử chú ý đến các mục quan trọng thì thấy cách đặt tiêu đề tương đối dễ nhận biết, việc chuyển qua từng khu vực cũng khá thuận tiện. Phần giấy phép được trình bày riêng nên nếu muốn kiểm tra thông tin thì không phải mất công tìm…
Mình vốn chỉ định vào xem https://v79.ca/ thử trang này có gì nên không dành nhiều thời gian đọc nội dung, chủ yếu lướt qua các khu vực trên giao diện. Điều mình để ý là cách họ đặt các danh mục khá dễ hiểu, nhìn sơ cũng biết mỗi phần nằm ở đâu mà không cần mở hết từng mục. Trang có sự phân chia giữa nội dung chính và thông tin bổ sung, nên khi kéo xuống không bị cảm giác mọi thứ dồn thành một khối. Mình có xem qua mục giấy phép, thấy thông tin được trình bày khá trực tiếp, thuận tiện cho người muốn tham khảo. Tổng thể không quá nổi bật hay cầu kỳ,…
https://98winc.london/ Khi ghé qua website này, mình chủ yếu muốn xem cách các thông tin được trình bày và mức độ thuận tiện khi tìm kiếm nội dung. Sau khi quan sát một vài chuyên mục, mình nhận thấy bố cục được tổ chức tương đối gọn gàng, những phần quan trọng có vị trí riêng nên khá dễ nhận biết. Các tiêu đề được phân chia rõ, phần hình ảnh và văn bản cũng được kết hợp vừa phải, giúp tổng thể trang không bị quá dày đặc. Mình có thử sử dụng thanh menu để chuyển sang những khu vực khác và thấy cách điều hướng khá đơn giản, không cần thực hiện nhiều thao tác. Một điểm…
tài xỉu online xuất hiện trong danh sách những website được đề cập ở một bài viết về trải nghiệm giải trí trên môi trường số. Vì đang tò mò cách các nền tảng mới xây dựng giao diện, mình mở liên kết để quan sát một chút. Điểm mình chú ý là cách trình bày có phần năng động, tiêu đề và các khu vực nội dung khá dễ phân biệt. Mình không dành thời gian kiểm tra từng chức năng mà chỉ xem trang chính rồi thử chuyển sang một danh mục khác. Sau vài phút, mình đã hình dung được bố cục tổng thể và quay lại nội dung đang đọc.
https://hiae888.tv/ mình vô tình bắt gặp trong một tài liệu tổng hợp về các nền tảng đang chú trọng ứng dụng công nghệ vào trải nghiệm giải trí. Vì muốn xem cách một trang được giới thiệu theo hướng hiện đại sẽ thể hiện ra sao, mình mở đường dẫn và lướt qua phần đầu. Giao diện có cách phối hợp các khu vực khá bắt mắt, danh mục chính dễ nhận diện và nội dung không bị dồn quá nhiều vào một chỗ. Mình chỉ xem sơ vài phút rồi đóng tab, chưa đánh giá sâu về chức năng hay chất lượng dịch vụ. Dù vậy, cách trình bày tương đối mạch lạc giúp mình nắm được cấu trúc…